| MODEL | FLB-25 |
| TECHNICAL SPECIFICATION | |
| MATERIAL TYPE | 60 X 30 MM Strengthened steel |
| COULOUR | The default is black, can be customized according to the requirements of the other colors |
| SEIZE | W 760mm x D 905mm x H 60mm |
| STANDARD | 8 x 40mm Pin 4pcs, Front link rood: 2pcs Back link rod:2pcs |
| WEIGHT | 20KG |
| MODEL | FLB-25 |
| TECHNICAL SPECIFICATION | |
| MATERIAL TYPE | 60 X 30 MM Strengthened steel |
| COULOUR | The default is black, can be customized according to the requirements of the other colors |
| SEIZE | W 760mm x D 905mm x H 60mm |
| STANDARD | 8 x 40mm Pin 4pcs, Front link rood: 2pcs Back link rod:2pcs |
| WEIGHT | 20KG |
| MODEL | FLB-8/FLB-10 |
| TECHNICAL SPECIFICATION | |
| MATERIAL TYPE | 60 X 30 MM Strengthened steel |
| COULOUR | The default is black, can be customized according to the requirements of the other colors |
| SEIZE | W 760mm x D 570mm x H 60mm |
| STANDARD | 8 x 40mm Pin 8pcs, Front link rood: 2pcs Back link rod:2pcs |
| WEIGHT | 15KG |
Technique Specification
Technique Specification
| technical parameter Stereo mode: : | 4×4Ω 1800W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| Bridge mode: | 2x 8Ω 3600W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| frequency response: | 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω | ||||||||
| Input sensitivity: | 0.775V/1.0V/1.4V | ||||||||
| Total harmonic distortion: | <0.5dB | ||||||||
| Input impedance: | >20K/＞10K | ||||||||
| Signal to noise ratio: | ＞105 dB | ||||||||
| dynamic range: | ≥90 dB | ||||||||
| Frequency bandwidth: | 85Hz—20KHz | ||||||||
| Damping factor: | >300 | ||||||||
| Conversion rate: | >15 V/us | ||||||||
| Voltage gain: | 30dB | ||||||||
| Output class: | E Class | ||||||||
| Protection function: | High temperature protection, DC protection, power on protection, overload protection | ||||||||
| External power supply: | 220V-240V/50-60HZ | ||||||||
| Size: | (W×D×H）483×430×132mm | ||||||||
| Weight: | G.W.28kg | ||||||||
Technique Specification
| System type: | 2 unit 2 phase inversion | ||||||||
| Rated power: | 100W | ||||||||
| Maximum power: | 200W | ||||||||
| Peak power: | 400W | ||||||||
| Nominal impedance: | 8 OHMS | ||||||||
| Recommended rated output power of amplifier: | 150W -200W @8 OHMS | ||||||||
| Nominal sensitivity ( 1W@1m ): | 96dB | ||||||||
| Maximum sound pressure level: | (119dB@200W) | ||||||||
| Frequency bandwidth: | 85Hz—20KHz | ||||||||
| Nominal directivity ( -6dB ): | 80*H*80*V | ||||||||
| Transducer configuration: | the low frequency driver 6.5″ ( 160mm unit 38mm voice coil 130mm Magnetic Steel )*1 | ||||||||
| the high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )*1 | |||||||||
| Frequency division Mode : | Passive From | ||||||||
| Connector: | SPEAKON NL SPEAKON NL4 ×1 PIN1 +/2+POS PIN1-/2-NEG | ||||||||
| SPEAKON PIN1+/1-2 Place Termina | |||||||||
| Box material: | 15mm ( 0.6″ ) MDF Medium density fiber board | ||||||||
| Color: | |||||||||
| Box size: | W 230mm* D 175mm *H 315mm | ||||||||
| NET Weight : | 5kg | ||||||||
| Reference application domain: | suitable for meeting room and fixed installation can be used as assistant | ||||||||
Reviews
There are no reviews yet.