System type:			2 unit 2 phase inversion
Rated power:			100W
Maximum power:			200W
Peak power:			400W
Nominal impedance:			8 OHMS
Recommended rated output power of amplifier:			150W -200W @8 OHMS
Nominal sensitivity ( 1W@1m ):			96dB
Maximum sound pressure level:			(119dB@200W)
Frequency bandwidth:			85Hz—20KHz
Nominal directivity ( -6dB ):			80H80*V
Transducer configuration:			the low frequency driver 6.5″ ( 160mm unit 38mm voice coil 130mm Magnetic Steel )*1
			the high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )*1
Frequency division Mode :			Passive From
Connector:			SPEAKON NL SPEAKON NL4 ×1 PIN1 +/2+POS PIN1-/2-NEG
			SPEAKON PIN1+/1-2 Place Termina
Box material:			15mm ( 0.6″ ) MDF Medium density fiber board
Color:
Box size:			W 230mm* D 175mm *H 315mm
NET Weight :			5kg
Reference application domain:			suitable for meeting room and fixed installation can be used as assistant

System type:			2 unit 2 phase inversion
Rated power:			100W
Maximum power:			200W
Peak power:			400W
Nominal impedance:			8 OHMS
Recommended rated output power of amplifier:			150W -200W @8 OHMS
Nominal sensitivity ( 1W@1m ):			96dB
Maximum sound pressure level:			(119dB@200W)
Frequency bandwidth:			85Hz—20KHz
Nominal directivity ( -6dB ):			80H80*V
Transducer configuration:			the low frequency driver 6.5″ ( 160mm unit 38mm voice coil 130mm Magnetic Steel )*1
			the high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )*1
Frequency division Mode :			Passive From
Connector:			SPEAKON NL SPEAKON NL4 ×1 PIN1 +/2+POS PIN1-/2-NEG
			SPEAKON PIN1+/1-2 Place Termina
Box material:			15mm ( 0.6″ ) MDF Medium density fiber board
Color:
Box size:			W 230mm* D 175mm *H 315mm
NET Weight :			5kg
Reference application domain:			suitable for meeting room and fixed installation can be used as assistant

MODEL	CS-08
TECHNICAL SPECIFICATION
System type	2 unit 2 phase inversion
Rated power	150 W
Maximum power	300 W
Peak Power	600 W
Nominal sensitivity (1w@1m)	97 dB
Nominal Impedance	8 OHMS
Recommended amplifier rated output power	200W -350W @8 OHMS
Directivity (-6dB)	80 H x 80 V
SPL	135dB@700w(138dB@1400w)
Frequency Bandwidth	70Hz—20KHz
Transducer Configuration	the low frequency driver 8″ ( 210mm unit 38mm voice coil 130mm Magnetic Steel )1 the high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )1
Frequency division mode	Passive
Connector	Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box Material	15mm ( 0.6″ ) MDF Medium density fiber board W 278mm* D 210mm *H 370mm
Weight	8KG

technical parameter Stereo mode:			2×4Ω 1800W Each channel,@ 1 kHz <0.05% T.H.D. 2×8Ω 1200W Each channel,@ 1 kHz <0.05% T.H.D.
Bridge mode:			1x 8Ω 3600W Each channel,@ 1 kHz <0.05% T.H.D.
frequency response:			20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω
Input sensitivity:			0.775V/1.0V/1.4V
Total harmonic distortion:			<0.5dB
Input impedance:			>20K/＞10K
Signal to noise ratio:			＞105 dB
dynamic range:			≥90 dB
Damping factor:			>300
Conversion rate:			>15 V/us
Voltage gain:			30dB
Output class:			E Class
Protection function:			High temperature protection, DC protection, power on protection, overload protection
External power supply:			220V-240V/50-60HZ
Size:			(W×D×H）483×430×88mm
Weight:			G.W.28kg

CS-06

Description