MTL-152E
Technical Specification
System type: | 2 way | ||||||||
Rated power: | 600W | ||||||||
Maximum power: | 900W | ||||||||
Peak power: | 1800W | ||||||||
Nominal impedance: | 8 OHMS | ||||||||
Recommended rated output power of amplifier: | 1000W -2000W @8 OHMS | ||||||||
Connector: | SPEAKON NL4 ×1 PIN1 +/POS . PIN1-/2NEG | ||||||||
Box material: | 15mm ( 0.7″ ) high density fiber board | ||||||||
Box size: | W 230mm* D 175mm *H 315mm | ||||||||
NET Weight : | 33kg | ||||||||
Description
[contact-form-7 404 "Not Found"]
Reviews (0)
Be the first to review “MTL-152E”
Related products
CS-08
MODEL | CS-08 |
TECHNICAL SPECIFICATION | |
System type | 2 unit 2 phase inversion |
Rated power | 150 W |
Maximum power | 300 W |
Peak Power | 600 W |
Nominal sensitivity (1w@1m) | 97 dB |
Nominal Impedance | 8 OHMS |
Recommended amplifier rated output power | 200W -350W @8 OHMS |
Directivity (-6dB) | 80 H x 80 V |
SPL | 135dB@700w(138dB@1400w) |
Frequency Bandwidth | 70Hz—20KHz |
Transducer Configuration | the low frequency driver 8″ ( 210mm unit 38mm voice coil 130mm Magnetic Steel )*1 the high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )*1 |
Frequency division mode | Passive |
Connector | Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG |
Box Material | 15mm ( 0.6″ ) MDF Medium density fiber board W 278mm* D 210mm *H 370mm |
Weight | 8KG |
M-10
TECHNICAL SPECIFICATION
System type:3-unit, 2-way inverted type
Rated power: 700 W
Maximum power: 1400W
Peak Power: 2800W
Nominal sensitivity (1w@1m): 107 dB
Nominal Impedance: 4 Ω / (16 Ω) Switchable Impedance
Recommended amplifier rated output power : 200W—300W@8 OHMS
Maximum sound Pressure level: 135dB@700w(138dB@1400w)
Nominal MAX SPL (Pmax@1m、16 OHMS): 125dB@300w (128dB@600w
Frequency Bandwidth: 65Hz—18KHz
Transducer Configuration: LF Driver Size 10″ (250mm Unit 65 mm Voice coil) ×2 HF Driver Size 3″ (75mm Voice coil) ×1 HF Waveguide Horn 1.5″ (38 mm Driver) ×1
Frequency division mode: Passive
Connector : Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box material:18mm (0.7″) High quality plywood
Weight: 30kg FLB-8/FLB-10
MODEL | FLB-8/FLB-10 |
TECHNICAL SPECIFICATION | |
MATERIAL TYPE | 60 X 30 MM Strengthened steel |
COULOUR | The default is black, can be customized according to the requirements of the other colors |
SEIZE | W 760mm x D 570mm x H 60mm |
STANDARD | 8 x 40mm Pin 8pcs, Front link rood: 2pcs Back link rod:2pcs |
WEIGHT | 15KG |
MA800CE
Technique Specification
technical parameter Stereo mode: : | 2×4 1200W Each channel,@ 1 kHz <0.05% T.H.D. 2×8 800W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
Bridge mode: | 1x 8 2400W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
frequency response: | 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω | ||||||||
Input sensitivity: | 0.775V/1.0V/1.4V | ||||||||
Total harmonic distortion: | <0.5dB | ||||||||
Input impedance: | >20K/>10K | ||||||||
Signal to noise ratio: | >105 dB | ||||||||
dynamic range: | ≥90 dB | ||||||||
Damping factor: | >300 | ||||||||
Conversion rate: | >15 V/us | ||||||||
Voltage gain: | 30dB | ||||||||
Output class: | E Class | ||||||||
Protection function: | High temperature protection, DC protection, power on protection, overload protection | ||||||||
External power supply: | 220V-240V/50-60HZ | ||||||||
Size: | (W×D×H)483×430×88mm | ||||||||
Weight: | G.W.24kg | ||||||||
DB-10E
Technique Specification
system Type: | 2 unit 2 phase inversion | ||||||||
Rated power: | 200W | ||||||||
Maximum power: | 400W | ||||||||
peak power: | 800W | ||||||||
Nominal impedance: | 8 OHMS | ||||||||
Recommended amplifier rated output power : | 200W-400W@8 OHMS | ||||||||
Nominal sensitivity (1w@1m): | 97db | ||||||||
Maximum sound Pressure level: | 123dB@400w | ||||||||
frequency bandwidth: | 60Hz-20KHz | ||||||||
nominal directivity(-6db): | 70 Hx 60V | ||||||||
transducer configuration | Low frequency device 10 200mm unit 50mm voice coil 135mm magnetic steel x1 High frequency device 1.4 34mm voice coil 90mm magnetic steel x1 | ||||||||
Frequency division mode: | Passive | ||||||||
Connector | speakon NL4x1 PIN+1/2+POS, PINH1-/2-NEG | ||||||||
Box Material | 15MM(0.6) High density Fiber board | ||||||||
Box Size: | W302mm*D310mm*H489mm | ||||||||
Colour | black | ||||||||
Weight: | 20kg |
FLB-12
MODEL | FLB-12 |
TECHNICAL SPECIFICATION | |
MATERIAL TYPE | 100 X 100 MM Strengthened steel |
COULOUR | The default is black, can be customized according to the requirements of the other colors |
SEIZE | W 1086mm x D 800mm x H 100mm |
STANDARD | 12 x 27mm Pin 4pcs, Front link rood: 2pcs Back link rod:2pcs |
WEIGHT | 25KG |
M-12
TECHNICAL SPECIFICATION
System type: Six unit three frequency inverted type
Rated power: HF 100W MF 200W LF 350W
Maximum power: 1000 W
Nominal sensitivity (1w@1m): HF 106dB MF 101dB LF 100dB
Nominal Impedance: HF 8OHMS MF 8OHMS LF 8OHMS
Recommended amplifier rated output power : 600W—1000W@8 OHMS
Maximum sound Pressure level: HF 126dB MF 124 dB LF 125 dB
Nominal MAX SPL (Pmax@1m、16 OHMS): 125dB@300w (128dB@600w
Frequency Bandwidth: 80Hz—18KHz
Transducer Configuration: LF Driver Size:12"(300mm driver speaker) ×1 MF:6.5"(165mm driver speaker) ×2 HF:1.4"(34mmVoice coil) ×3
Crossover Mode: Active - Reference Crossover: L/M 300Hz~400Hz M/H 2800Hz~3200Hz
Connector : Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box material:18mm (0.72″)High quality plywood
Cabinet Dimension: 1000 mm (W)×365 mm (H)×550 mm (D)
Weight: 30kg
Reviews
There are no reviews yet.