Showing 35–49 of 49 results

Show sidebar
Show 9 12 24
Filters
Close

M-12- Line array

Technical parameters : System type: 3-unit 2-frequency inversion Rated power: 800 W , maximum power: 1600 W , peak power: 3200 W Nominal impedance: 4 Ω Nominal sensitivity ( 1W@1m ): 107 dB Maximum sound pressure level ( Pmax@1m ): 13 6 dB @800w(13 9 dB@1600w) Frequency bandwidth: . 5 0 Hz -18 KHz Nominal directivity ( -6dB ): . 1 0 0 [deg.] (H) × . 5 [deg.] (V) (Note: the vertical coverage angle line array varies depending on the degree of curvature and the array) Adjustable angle: 0 ° ～ 7 °, the unit adjusts the angle 1 ° Recommended number of arrays: ≥4 Rated parallel number: ≤1 Transducer configuration: low frequency driver 12" (300 mm unit 75 mm voice coil) × 2 high frequency driver 3" (75 mm voice coil) × 1 High frequency waveguide horn 1.5" (38 mm throat) ×1 Crossover mode: passive Connector: SPEAKON NL4×2 PIN1+/2+POS. PIN1-/2-NEG. Box material: 18 mm ( 0.7″) birch plywood Hanging hardware: professional adjustable angle hanging piece Color: The default is black water-based environmentally friendly spray, other colors can be customized according to requirements Case size ( H × W is × D): 360mm × 1024mm × 545mm Weight (each): 48 kg Reference application areas: small-scale outdoor performance sound reinforcement, theater, auditorium main sound reinforcement
Read more
Quick view
Close

DB-10E

Technique Specification

system Type: 2 unit 2 phase inversion
Rated power: 200W
Maximum power: 400W
peak power: 800W
Nominal impedance: 8 OHMS
Recommended amplifier rated output power : 200W-400W@8 OHMS
Nominal sensitivity (1w@1m): 97db
Maximum sound Pressure level: 123dB@400w
frequency bandwidth: 60Hz-20KHz
nominal directivity(-6db): 70 Hx 60V
transducer configuration Low frequency device 10 200mm unit 50mm voice coil 135mm magnetic steel x1 High frequency device 1.4 34mm  voice coil 90mm magnetic steel x1
Frequency division mode: Passive
Connector speakon NL4x1 PIN+1/2+POS, PINH1-/2-NEG
Box Material 15MM(0.6) High density Fiber board
Box Size: W302mm*D310mm*H489mm
Colour black
Weight: 20kg
Read more
Quick view
Close

MA800CE

Technique Specification

technical parameter Stereo mode: : 2×4 1200W Each channel,@ 1 kHz <0.05% T.H.D. 2×8 800W Each channel,@ 1 kHz <0.05% T.H.D.
Bridge mode: 1x 8 2400W Each channel,@ 1 kHz <0.05% T.H.D.
frequency response: 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω
Input sensitivity: 0.775V/1.0V/1.4V
Total harmonic distortion: <0.5dB
Input impedance: >20K/＞10K
Signal to noise ratio: ＞105 dB
dynamic range: ≥90 dB
Damping factor: >300
Conversion rate: >15 V/us
Voltage gain: 30dB
Output class: E Class
Protection function: High temperature protection, DC protection, power on protection, overload protection
External power supply: 220V-240V/50-60HZ
Size: (W×D×H）483×430×88mm
Weight: G.W.24kg
Read more
Quick view
Close

MA1000CE

Technique Specification

technical parameter Stereo mode: 2×4Ω 1800W Each channel,@ 1 kHz <0.05% T.H.D. 2×8Ω 1200W Each channel,@ 1 kHz <0.05% T.H.D.
Bridge mode: 1x 8Ω 3600W Each channel,@ 1 kHz <0.05% T.H.D.
frequency response: 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω
Input sensitivity: 0.775V/1.0V/1.4V
Total harmonic distortion: <0.5dB
Input impedance: >20K/＞10K
Signal to noise ratio: ＞105 dB
dynamic range: ≥90 dB
Damping factor: >300
Conversion rate: >15 V/us
Voltage gain: 30dB
Output class: E Class
Protection function: High temperature protection, DC protection, power on protection, overload protection
External power supply: 220V-240V/50-60HZ
Size: (W×D×H）483×430×88mm
Weight: G.W.28kg
Read more
Quick view
Close

MA41300CE

Technique Specification

technical parameter Stereo mode: : 4×4Ω 1800W Each channel,@ 1 kHz <0.05% T.H.D.
Bridge mode: 2x 8Ω 3600W Each channel,@ 1 kHz <0.05% T.H.D.
frequency response: 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω
Input sensitivity: 0.775V/1.0V/1.4V
Total harmonic distortion: <0.5dB
Input impedance: >20K/＞10K
Signal to noise ratio: ＞105 dB
dynamic range: ≥90 dB
Frequency bandwidth:  85Hz—20KHz
Damping factor: >300
Conversion rate: >15 V/us
Voltage gain: 30dB
Output class: E Class
Protection function: High temperature protection, DC protection, power on protection, overload protection
External power supply: 220V-240V/50-60HZ
Size: (W×D×H）483×430×132mm
Weight: G.W.28kg
Read more
Quick view
Close

MTL-152E

Technical Specification

System type: 2 way
Rated power: 600W
Maximum power: 900W
Peak power: 1800W
Nominal impedance: 8 OHMS
Recommended rated output power of amplifier:  1000W -2000W @8 OHMS
Connector:  SPEAKON NL4 ×1  PIN1 +/POS . PIN1-/2NEG
Box material: 15mm ( 0.7″ ) high density fiber board
Box size: W 230mm* D 175mm *H 315mm
 NET Weight : 33kg
Read more
Quick view
Close

QX-115

Technique Specification

  • System Type: 2-unit 2-way bass reflex
  • Rated Power: 450W
  • Maximum Power: 900W
  • Peak Power: 1800W
  • Nominal Impedance: 8 OHMS
  • Recommend Amplifier Rated Output Power: 600W—800W@8 OHMS
  • Sensitivity (1W@1m): 99dB
  • SPL: 126dB@450w (129dB@900w)
  • Frequency Bandwidth: 48Hz—20KHz
  • Coverage (-6dB): 90°H×50°V
  • Transducer Configuration:
  1. Low frequency driver 15″ (300mm unit 75mm voice coil ) ×1
  2. High frequency driver 2″ (51mm voice coil ) ×1
  • Frequency Mode: Passive
  • Connector: SPEAKON NL SPEAKON NL4×1 PIN1+/2+POS.  PIN1-/2-NEG)
  • Cabinet Material: 18mm (0.7″) MDF
  • Color: The default is black, other colors can be customized.
  • Product Dimension: W476*D460*H706mm
  • Weight: 35kg
  • Reference Application Field: Suitable for the fixed installation of multi-functional hall, auditorium, conference room, KTV, bar
Read more
Quick view
Close

MTL700-3G

Technique Specification

  • System Type: 2-unit 2-way bass reflex
  • Rated Power: 500W
  • Maximum Power: 1000W
  • Nominal Impedance: 8 OHMS
  • Recommend Amplifier Rated Output Power: 600W—1000W@8 OHMS
  • Sensitivity (1W@1m): 97dB
  • SPL: 124dB@500W (127dB@1000W)
  • Coverage(-6dB): 50°×100°Hor. ×50°Ver
  • Frequency Bandwidth: 46Hz—18KHz
  • Transducer Configuration:
  1. Low frequency driver 15″ (75mm voice coil 200mm magnet) ×1
  2. NdFeB high frequency driver 2.5″ (65mm voice coil 110mm magnet) ×1
  • Connector: SPEAKON NL4×2 PIN1+/2+POS.  PIN1-/2-NEG.
  • Cabinet Material: 18mm (0.7″) plywood
  • Color: The default is black, other colors can be customized.
  • Product Dimension (W×D×H): 530mm×420mm×728mm
  • Packaging Dimension (W×D×H): 605mm×490mm×805mm
  • Weight: 32.5Kg
  • Reference Application Field: Suitable for multi-function hall, auditorium, lecture hall, conference room, KTV, bar and other fixed installation
Read more
Quick view
Close

DB218-3G

Technique Specification

  • System Type: 2-unit bass reflex
  • Rated Power: 1400W
  • Maximum Power: 2800W
  • Nominal Impedance: 4 OHMS
  • Recommend Amplifier Rated Output Power: 2000W—300W@4 OHMS
  • Sensitivity (1W@1m): 102dB
  • SPL: 133dB@1400W (136dB@2800W)
  • Coverage (-6dB): 360°Hor. ×360°Ver
  • Frequency Bandwidth: 37Hz—300Hz
  • Transducer Configuration: Low frequency driver 18″ (100mm voice coil 220mm magnet) ×2
  • Connector: SPEAKON NL4×2 PIN1+/2+POS.  PIN1-/2-NEG.
  • Cabinet Material: 18mm (0.7″) plywood
  • Color: The default is black, other colors can be customized.
  • Product Dimension (W×D×H): 980mm×690mm×598mm
  • Packaging Dimension (W×D×H): 1055mm×765mm×670mm
  • Weight: 69.8Kg
  • Reference Application Field: Suitable for multi-function hall, auditorium, lecture hall, conference room, KTV, bar and other fixed installation
Read more
Quick view
Close

DB25-3G

Technique Specification

  • System Type: 5-unit 3-way bass reflex
  • Rated Power: 1000W
  • Maximum Power: 2000W
  • Nominal Impedance: 4 OHMS
  • Recommend Amplifier Rated Output Power: 1500W—2000W@4 OHMS
  • Sensitivity (1W@1m): 100dB
  • SPL: 130dB@1000W (133dB@2000W)
  • Coverage (-6dB): 100°Hor.×60°Ver
  • Frequency Bandwidth: 45Hz—18KHz
  • Transducer Configuration:
  1. Low frequency driver 15″ (75mm voice coil 180mm magnet) ×2
  2.    NdFeB medium frequency driver 6.5″ (45mm voice coil 85mm magnet) ×2
  3. High frequency driver 3″ (75mm voice coil 165mm magnet)×1
  • Connector: SPEAKON NL4×2 PIN1+/2+POS.  PIN1-/2-NEG.
  • Cabinet Material: 18mm (0.7″) plywood
  • Color: The default is black, other colors can be customized.
  • Product Dimension (W×D×H): 593mm×525mm×1286mm
  • Packaging Dimension (W×D×H): 660mm×595mm×1365mm
  • Weight: 71.3Kg
  • Reference Application Field: Suitable for multi-function hall, auditorium, lecture hall, conference room, KTV, bar and other fixed installation
Read more
Quick view
Close

DB15M-3G

Technique Specification

  • System Type: 2-unit 2-way bass reflex
  • Rated Power: 500W
  • Maximum Power: 1000W
  • Nominal Impedance: 8 OHMS
  • Recommend Amplifier Rated Output Power: 600W—1000W@8 OHMS
  • Sensitivity(1W@1m): 97dB
  • SPL: 124dB@500W (127dB@1000W)
  • Coverage(-6dB): 50°×100°Hor. ×50°Ver
  • Frequency Bandwidth: 45Hz—18KHz
  • Transducer Configuration:
  1. Low frequency driver 15″ (75mm voice coil 180mm magnet) x1
  2. High frequency driver 3″ (75mm voice coil 165mm magnet) x1
  • Connector: SPEAKON NL4×2 PIN1+/2+POS.  PIN1-/2-NEG.
  • Cabinet Material: 15mm (0.6″) plywood
  • Color: The default is black, other colors can be customized.
  • Product Dimension (W×D×H): 573mm×372mm×715mm
  • Packaging Dimension (W×D×H): 560mm×535mm×790mm
  • Weight: 28.6Kg
  • Reference Application Field: Suitable for multi-function hall, auditorium, lecture hall, conference room, KTV, bar and other fixed installation
Read more
Quick view
Close

DB-25NW/DB25OW

Technique Specification

System type: 3 unit 3 phase inversion
Rated power: 1000W
Maximum power: 2000W
Peak power: 4000W
Nominal impedance: 4 OHMS
Recommended rated output power of amplifier: 1000W -2000W @4 OHMS
Nominal sensitivity ( 1W@1m ): 103dB
Maximum sound pressure level: 133dB@1000W(136dB@2000W)
Frequency bandwidth: 40Hz—16.5KHz
Nominal directivity ( -6dB ): 100*H*70*V
Transducer configuration: the  low frequency driver 15″ (380mm unit 75mm voice coil 220mm Magnetic Steel )*1
the  high frequency driver 30″ ( 75mm voice coil 170mm Magnetic Steel )*1
Frequency division Mode : Passive
Connector:   SPEAKON NL4 ×1  PIN1 +/2+POS  PIN1-/2-NEG
Box material: 18mm ( 0.7″ ) High density fiber board
Color: the Default is black, caan be customized according to the requirements of other colors
Box size: W 500mm* D500mm *H 1161mm /W500mm*H 1161mm
 NET Weight : 55kg
Reference application domain: suitable flow performance , multi-funcation hall,
Read more
Quick view
Close

CS-06

Technique Specification

System type: 2 unit 2 phase inversion
Rated power: 100W
Maximum power: 200W
Peak power: 400W
Nominal impedance: 8 OHMS
Recommended rated output power of amplifier:  150W -200W @8 OHMS
Nominal sensitivity ( 1W@1m ): 96dB
Maximum sound pressure level: (119dB@200W)
Frequency bandwidth:  85Hz—20KHz
Nominal directivity ( -6dB ): 80*H*80*V
Transducer configuration: the  low frequency driver 6.5″ ( 160mm unit 38mm voice coil 130mm Magnetic Steel )*1
the  high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )*1
Frequency division Mode : Passive From
Connector: SPEAKON NL  SPEAKON NL4 ×1  PIN1 +/2+POS  PIN1-/2-NEG
SPEAKON PIN1+/1-2 Place Termina
Box material: 15mm ( 0.6″ ) MDF Medium density fiber board
Color:
Box size: W 230mm* D 175mm *H 315mm
 NET Weight : 5kg
Reference application domain: suitable for meeting  room and fixed installation can be used as assistant
Read more
Quick view
Close

QX-118

Technique Specification

System type:  1 unit reverse phase
Rated power:  700W
Maximum power: 1400W
Peak power: 2800W
Nominal impedance: 8 OHMS
Recommended rated output power of amplifier:  1000W @8 OHMS
Nominal sensitivity ( 1W@1m ): 102dB
Maximum sound pressure level: 130dB@700w(133dB@1400W)
Frequency bandwidth:  35Hz—300Hz
Nominal directivity ( -6dB ): ----------
Transducer configuration:  low frequency driver 18″  460mm unit with 100mm voice coil × 220Magnetic Steel *1
Frequency division Mode : Passive
Connector: SPEAKON NL  SPEAKON NL4 ×1  PIN1 +/2+POS  PIN1-/2-NEG
Box material: 18mm ( 0.7″ ) MDF Medium density fiber board
Color: Dark gray,can be customized other color
Box size: W 600mm* D 700mm *H 531mm
 NET Weight :  48kg
Reference application domain: suitable for multi function hall ,auditorium , lecture hall ,conference room,KTV,bar,Etc
Read more
Quick view
Close

QX-218

Technique Specification

System type: 2 unit reverse phase
Rated power: 1400W
Maximum power: 2800W
Peak power: 5600W
Nominal impedance: 4 OHMS
Recommended rated output power of amplifier:  1200W -1500W @8 OHMS
Nominal sensitivity ( 1W@1m ): 104dB
Maximum sound pressure level: 135dB@1400w(138dB@2800W)
Frequency bandwidth:  35Hz—300Hz
Nominal directivity ( -6dB ): ----------
Transducer configuration:  low frequency driver 18″  460mm unit with 100mm voice coil × 220Magnetic Steel *2
Frequency division Mode : Passive
Connector: SPEAKON NL  SPEAKON NL4 ×1  PIN1 +/2+POS  PIN1-/2-NEG
Box material: 18mm ( 0.7″ ) MDF Medium density fiber board
Color: Dark gray,can be customized other color
Box size: W 600mm* D 700mm *H 1044mm
 NET Weight : 95kg
Reference application domain suitable for multi function hall ,auditorium , lecture hall ,conference room,KTV,bar,Etc
 
Read more
Quick view