AT-06
TECHNICAL SPECIFICATION
System type: 2-unit 2-way phase inversion
Rated power:100W
Maximum power: 200W Peak power: 400W
Nominal sensitivity (1w@1m): 96db
Nominal Impedance: 8 OHMS
Recommended amplifier rated output power : 200W—300W@8 OHMS
Maximum sound Pressure level: 116dB@100W (119dB@200W)
Frequency Bandwidth:80Hz—20KHz
Transducer Configuration: Low frequency driver 5″ (165mm unit 35 voice coil) ×1 NdFeB high frequency driver 1″ (25mm voice coil ) ×1 Frequency division
Mode: Passive
Connector : Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box seize: 190mm×210mm×310mm
Weight: 5.0Kg
AT-12
TECHNICAL SPECIFICATION
System Type: 2-unit 2-unit bass reflex
Rated Power: 450W
Maximum Power: 900W Peak Power: 1800W
Nominal Impedance: 8 OHMS
Recommend Amplifier Rated Output Power: 500W-650W@8 OHMS
Nominal Sensitivity(1W@1m): 97dB Max. SPL: 124dB@450w (126dB@900w)
Coverage: 90°H×70°V
Frequency Bandwidth: 58Hz-20KHz Crossover
Mode: Passive
Transducer Configuration: Low frequency driver 12" (305mm unit 75mm voice coil ) ×1 High frequency driver 1.7" (44mm voice coil ) ×1
Connector: SPEAKON NL4×2 PIN1+/2+POS. PIN1-/2-NEG.
Cabinet Material: 18 mm(0.7") high quality plywood
Color: The default is black, other colors can be customized.
Product Dimension: W375 mm*D340 mmH656mm
Weight: 22 kg
CS-06
Technique Specification
| System type: | 2 unit 2 phase inversion | ||||||||
| Rated power: | 100W | ||||||||
| Maximum power: | 200W | ||||||||
| Peak power: | 400W | ||||||||
| Nominal impedance: | 8 OHMS | ||||||||
| Recommended rated output power of amplifier: | 150W -200W @8 OHMS | ||||||||
| Nominal sensitivity ( 1W@1m ): | 96dB | ||||||||
| Maximum sound pressure level: | (119dB@200W) | ||||||||
| Frequency bandwidth: | 85Hz—20KHz | ||||||||
| Nominal directivity ( -6dB ): | 80*H*80*V | ||||||||
| Transducer configuration: | the low frequency driver 6.5″ ( 160mm unit 38mm voice coil 130mm Magnetic Steel )*1 | ||||||||
| the high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )*1 | |||||||||
| Frequency division Mode : | Passive From | ||||||||
| Connector: | SPEAKON NL SPEAKON NL4 ×1 PIN1 +/2+POS PIN1-/2-NEG | ||||||||
| SPEAKON PIN1+/1-2 Place Termina | |||||||||
| Box material: | 15mm ( 0.6″ ) MDF Medium density fiber board | ||||||||
| Color: | |||||||||
| Box size: | W 230mm* D 175mm *H 315mm | ||||||||
| NET Weight : | 5kg | ||||||||
| Reference application domain: | suitable for meeting room and fixed installation can be used as assistant | ||||||||
CS-08
| MODEL | CS-08 |
| TECHNICAL SPECIFICATION | |
| System type | 2 unit 2 phase inversion |
| Rated power | 150 W |
| Maximum power | 300 W |
| Peak Power | 600 W |
| Nominal sensitivity (1w@1m) | 97 dB |
| Nominal Impedance | 8 OHMS |
| Recommended amplifier rated output power | 200W -350W @8 OHMS |
| Directivity (-6dB) | 80 H x 80 V |
| SPL | 135dB@700w(138dB@1400w) |
| Frequency Bandwidth | 70Hz—20KHz |
| Transducer Configuration | the low frequency driver 8″ ( 210mm unit 38mm voice coil 130mm Magnetic Steel )*1 the high frequency driver 3″ ( 25mm voice coil 90mm Magnetic Steel )*1 |
| Frequency division mode | Passive |
| Connector | Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG |
| Box Material | 15mm ( 0.6″ ) MDF Medium density fiber board W 278mm* D 210mm *H 370mm |
| Weight | 8KG |
DB-10E
Technique Specification
| system Type: | 2 unit 2 phase inversion | ||||||||
| Rated power: | 200W | ||||||||
| Maximum power: | 400W | ||||||||
| peak power: | 800W | ||||||||
| Nominal impedance: | 8 OHMS | ||||||||
| Recommended amplifier rated output power : | 200W-400W@8 OHMS | ||||||||
| Nominal sensitivity (1w@1m): | 97db | ||||||||
| Maximum sound Pressure level: | 123dB@400w | ||||||||
| frequency bandwidth: | 60Hz-20KHz | ||||||||
| nominal directivity(-6db): | 70 Hx 60V | ||||||||
| transducer configuration | Low frequency device 10 200mm unit 50mm voice coil 135mm magnetic steel x1 High frequency device 1.4 34mm voice coil 90mm magnetic steel x1 | ||||||||
| Frequency division mode: | Passive | ||||||||
| Connector | speakon NL4x1 PIN+1/2+POS, PINH1-/2-NEG | ||||||||
| Box Material | 15MM(0.6) High density Fiber board | ||||||||
| Box Size: | W302mm*D310mm*H489mm | ||||||||
| Colour | black | ||||||||
| Weight: | 20kg | ||||||||
DB-25NW/DB25OW
Technique Specification
| System type: | 3 unit 3 phase inversion | |||||||
| Rated power: | 1000W | |||||||
| Maximum power: | 2000W | |||||||
| Peak power: | 4000W | |||||||
| Nominal impedance: | 4 OHMS | |||||||
| Recommended rated output power of amplifier: | 1000W -2000W @4 OHMS | |||||||
| Nominal sensitivity ( 1W@1m ): | 103dB | |||||||
| Maximum sound pressure level: | 133dB@1000W(136dB@2000W) | |||||||
| Frequency bandwidth: | 40Hz—16.5KHz | |||||||
| Nominal directivity ( -6dB ): | 100*H*70*V | |||||||
| Transducer configuration: | the low frequency driver 15″ (380mm unit 75mm voice coil 220mm Magnetic Steel )*1 | |||||||
| the high frequency driver 30″ ( 75mm voice coil 170mm Magnetic Steel )*1 | ||||||||
| Frequency division Mode : | Passive | |||||||
| Connector: | SPEAKON NL4 ×1 PIN1 +/2+POS PIN1-/2-NEG | |||||||
| Box material: | 18mm ( 0.7″ ) High density fiber board | |||||||
| Color: | the Default is black, caan be customized according to the requirements of other colors | |||||||
| Box size: | W 500mm* D500mm *H 1161mm /W500mm*H 1161mm | |||||||
| NET Weight : | 55kg | |||||||
| Reference application domain: | suitable flow performance , multi-funcation hall, | |||||||
DB15M-3G
Technique Specification
- System Type: 2-unit 2-way bass reflex
- Rated Power: 500W
- Maximum Power: 1000W
- Nominal Impedance: 8 OHMS
- Recommend Amplifier Rated Output Power: 600W—1000W@8 OHMS
- Sensitivity(1W@1m): 97dB
- SPL: 124dB@500W (127dB@1000W)
- Coverage(-6dB): 50°×100°Hor. ×50°Ver
- Frequency Bandwidth: 45Hz—18KHz
- Transducer Configuration:
- Low frequency driver 15″ (75mm voice coil 180mm magnet) x1
- High frequency driver 3″ (75mm voice coil 165mm magnet) x1
- Connector: SPEAKON NL4×2 PIN1+/2+POS. PIN1-/2-NEG.
- Cabinet Material: 15mm (0.6″) plywood
- Color: The default is black, other colors can be customized.
- Product Dimension (W×D×H): 573mm×372mm×715mm
- Packaging Dimension (W×D×H): 560mm×535mm×790mm
- Weight: 28.6Kg
- Reference Application Field: Suitable for multi-function hall, auditorium, lecture hall, conference room, KTV, bar and other fixed installation
DB218-3G
Technique Specification
- System Type: 2-unit bass reflex
- Rated Power: 1400W
- Maximum Power: 2800W
- Nominal Impedance: 4 OHMS
- Recommend Amplifier Rated Output Power: 2000W—300W@4 OHMS
- Sensitivity (1W@1m): 102dB
- SPL: 133dB@1400W (136dB@2800W)
- Coverage (-6dB): 360°Hor. ×360°Ver
- Frequency Bandwidth: 37Hz—300Hz
- Transducer Configuration: Low frequency driver 18″ (100mm voice coil 220mm magnet) ×2
- Connector: SPEAKON NL4×2 PIN1+/2+POS. PIN1-/2-NEG.
- Cabinet Material: 18mm (0.7″) plywood
- Color: The default is black, other colors can be customized.
- Product Dimension (W×D×H): 980mm×690mm×598mm
- Packaging Dimension (W×D×H): 1055mm×765mm×670mm
- Weight: 69.8Kg
- Reference Application Field: Suitable for multi-function hall, auditorium, lecture hall, conference room, KTV, bar and other fixed installation
DB25-3G
Technique Specification
- System Type: 5-unit 3-way bass reflex
- Rated Power: 1000W
- Maximum Power: 2000W
- Nominal Impedance: 4 OHMS
- Recommend Amplifier Rated Output Power: 1500W—2000W@4 OHMS
- Sensitivity (1W@1m): 100dB
- SPL: 130dB@1000W (133dB@2000W)
- Coverage (-6dB): 100°Hor.×60°Ver
- Frequency Bandwidth: 45Hz—18KHz
- Transducer Configuration:
- Low frequency driver 15″ (75mm voice coil 180mm magnet) ×2
- NdFeB medium frequency driver 6.5″ (45mm voice coil 85mm magnet) ×2
- High frequency driver 3″ (75mm voice coil 165mm magnet)×1
- Connector: SPEAKON NL4×2 PIN1+/2+POS. PIN1-/2-NEG.
- Cabinet Material: 18mm (0.7″) plywood
- Color: The default is black, other colors can be customized.
- Product Dimension (W×D×H): 593mm×525mm×1286mm
- Packaging Dimension (W×D×H): 660mm×595mm×1365mm
- Weight: 71.3Kg
- Reference Application Field: Suitable for multi-function hall, auditorium, lecture hall, conference room, KTV, bar and other fixed installation
Digital equalizer GEQ231
technical parameter:
Standard 2U can be mounted on the rack
Dual-channel synchronous control 31-band EQ equalization, DSP digital and analog integrated combination
Each equalization band has an LED spectrum indicator to help users clearly see the pitch level during use
Real-time 31-segment frequency jump, with 99% spectrum accuracy.
With cutting-edge noise gate noise reduction function, realize the elimination of noise in the system
The input and output interface adopts multiple types of interfaces: TRS6.35/RCA Lotus/XLR XLR balanced interface
EQ Bypass: Bypass the graphic equalizer in the signal path
Output channel adjustable delay, and output audio low-cut adjustable
With the function of saving and recalling presets, 10 modes can be saved and recalled.
Power supply mode : 220V
Sound transmission gain : -1dB or 11dB
Line input impedance : 15KΩ
Line output impedance : 300Ω
Frequency response : 20Hz～20KHz
Signal to noise ratio : 82dB
Power consumption: 30W
Product size ( H×W×D) : 88mm×480mm×175mm
Net weight: 3.64Kg
DP48 Digital matrix processors
technical parameter:
Frequency response: 20Hz-20KHz, +/-0.3dB
Signal to noise ratio: > 115dB
Harmonic distortion: < 0.005%, 1KHz (0dBV)
Resolution: < 100dB
Digital processing: 24bit sigma-delta converter, 96KHz sampling rate
Maximum input level: +18dBu
Maximum output level: +18dBu
Input impedance: 1M Ω stereo, 500K Ω mono
Output impedance: < 500 Ω
Power supply: AC 95V-264V 50Hz/60Hz
Body size ( H×W×D) : 44mm×482mm×205mm
Weight: 2.88kg
FLB-12
| MODEL | FLB-12 |
| TECHNICAL SPECIFICATION | |
| MATERIAL TYPE | 100 X 100 MM Strengthened steel |
| COULOUR | The default is black, can be customized according to the requirements of the other colors |
| SEIZE | W 1086mm x D 800mm x H 100mm |
| STANDARD | 12 x 27mm Pin 4pcs, Front link rood: 2pcs Back link rod:2pcs |
| WEIGHT | 25KG |
FLB-25
| MODEL | FLB-25 |
| TECHNICAL SPECIFICATION | |
| MATERIAL TYPE | 60 X 30 MM Strengthened steel |
| COULOUR | The default is black, can be customized according to the requirements of the other colors |
| SEIZE | W 760mm x D 905mm x H 60mm |
| STANDARD | 8 x 40mm Pin 4pcs, Front link rood: 2pcs Back link rod:2pcs |
| WEIGHT | 20KG |
FLB-8/FLB-10
| MODEL | FLB-8/FLB-10 |
| TECHNICAL SPECIFICATION | |
| MATERIAL TYPE | 60 X 30 MM Strengthened steel |
| COULOUR | The default is black, can be customized according to the requirements of the other colors |
| SEIZE | W 760mm x D 570mm x H 60mm |
| STANDARD | 8 x 40mm Pin 8pcs, Front link rood: 2pcs Back link rod:2pcs |
| WEIGHT | 15KG |
M-08
TECHNICAL SPECIFICATION
System type: 4-unit, 2-way inverted type
Rated power: 300 W
Maximum power: 600W
Peak Power: 1200W
Nominal sensitivity (1w@1m): 106 dB @ 4 Ω 100 dB @16 Ω
Nominal Impedance: 4 Ω / (16 Ω) Switchable Impedance
Recommended amplifier rated output power : 200W—300W@8 OHMS
Maximum sound Pressure level: Nominal MAX SPL (Pmax@1m、4 OHMS): 131dB@300w (134dB@600w) Nominal MAX SPL (Pmax@1m、16 OHMS): 125dB@300w (128dB@600w Frequency Bandwidth: 80Hz—18.5KHz
Transducer Configuration: LF Driver Size 8″ (200mm Unit 50 mm Voice coil) ×2 HF Driver Size 1.3C (34mm Voice coil) ×2
Frequency division mode: Passive
Connector : Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box material:15mm (0.6″)
High quality plywood W748 mm*D 305mm*H248mm (187mm)
Weight: 24kg 
M-10
TECHNICAL SPECIFICATION
System type:3-unit, 2-way inverted type
Rated power: 700 W
Maximum power: 1400W
Peak Power: 2800W
Nominal sensitivity (1w@1m): 107 dB
Nominal Impedance: 4 Ω / (16 Ω) Switchable Impedance
Recommended amplifier rated output power : 200W—300W@8 OHMS
Maximum sound Pressure level: 135dB@700w(138dB@1400w)
Nominal MAX SPL (Pmax@1m、16 OHMS): 125dB@300w (128dB@600w
Frequency Bandwidth: 65Hz—18KHz
Transducer Configuration: LF Driver Size 10″ (250mm Unit 65 mm Voice coil) ×2 HF Driver Size 3″ (75mm Voice coil) ×1 HF Waveguide Horn 1.5″ (38 mm Driver) ×1
Frequency division mode: Passive
Connector : Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box material:18mm (0.7″) High quality plywood
Weight: 30kg 
M-12
TECHNICAL SPECIFICATION
System type: Six unit three frequency inverted type
Rated power: HF 100W MF 200W LF 350W
Maximum power: 1000 W
Nominal sensitivity (1w@1m): HF 106dB MF 101dB LF 100dB
Nominal Impedance: HF 8OHMS MF 8OHMS LF 8OHMS
Recommended amplifier rated output power : 600W—1000W@8 OHMS
Maximum sound Pressure level: HF 126dB MF 124 dB LF 125 dB
Nominal MAX SPL (Pmax@1m、16 OHMS): 125dB@300w (128dB@600w
Frequency Bandwidth: 80Hz—18KHz
Transducer Configuration: LF Driver Size:12"(300mm driver speaker) ×1 MF:6.5"(165mm driver speaker) ×2 HF:1.4"(34mmVoice coil) ×3
Crossover Mode: Active - Reference Crossover: L/M 300Hz～400Hz M/H 2800Hz～3200Hz
Connector : Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box material:18mm (0.72″)High quality plywood
Cabinet Dimension: 1000 mm (W)×365 mm (H)×550 mm (D)
Weight: 30kg
M-12- Line array
Technical parameters :
System type: 3-unit 2-frequency inversion
Rated power: 800 W , maximum power: 1600 W , peak power: 3200 W
Nominal impedance: 4 Ω
Nominal sensitivity ( 1W@1m ): 107 dB
Maximum sound pressure level ( Pmax@1m ): 13 6 dB @800w(13 9 dB@1600w)
Frequency bandwidth: . 5 0 Hz -18 KHz
Nominal directivity ( -6dB ): . 1 0 0 [deg.] (H) × . 5 [deg.] (V) (Note: the vertical coverage angle line array varies depending on the degree of curvature and the array)
Adjustable angle: 0 ° ～ 7 °, the unit adjusts the angle 1 °
Recommended number of arrays: ≥4
Rated parallel number: ≤1
Transducer configuration: low frequency driver 12" (300 mm unit 75 mm voice coil) × 2 high frequency driver 3" (75 mm voice coil) × 1
High frequency waveguide horn 1.5" (38 mm throat) ×1
Crossover mode: passive
Connector: SPEAKON NL4×2 PIN1+/2+POS. PIN1-/2-NEG.
Box material: 18 mm ( 0.7″) birch plywood
Hanging hardware: professional adjustable angle hanging piece
Color: The default is black water-based environmentally friendly spray, other colors can be customized according to requirements
Case size ( H × W is × D): 360mm × 1024mm × 545mm
Weight (each): 48 kg
Reference application areas: small-scale outdoor performance sound reinforcement, theater, auditorium main sound reinforcement
M-25
TECHNICAL SPECIFICATION
System type: 2-unit, Band-pass
Rated power: 1000W
Maximum power: 2000 W - peak: 4000 W
Nominal sensitivity (1w@1m): 102
Nominal Impedance: 4 OHMS Recommended amplifier rated output power : 600W—1000W@8 OHMS
Maximum sound Pressure level: 132dB@1000W(135dB@2000W)
Frequency Bandwidth: 30Hz—200Hz
Transducer Configuration: LF Driver Size 15″ (380mm Unit 100 mm Voice coil) ×2
Connector : Speakon NL4x2pin 1+/2+POS PIN1-/2-NEG
Box material:18mm (0.72″) High quality plywood
Weight: 72 KG 
M-25B – line array flying subwoofer
Technical Specifications
System type: 2-unit, Band-pass
Rated Power: 1000 W
Maximum Power: 2000 W
Peak Power: 4000 W
Impedance: 4 OHMS
Sensitivity (1W@1m): 102 dB
Nominal MAX SPL: 132dB@1000W(135dB@2000W)
Frequency Bandwidth: 30Hz—200Hz
Directivity (-6dB): omni-directional
Recommended Array Quantity: ≥2
Rated Parallel: ≤1
Transducer: LF Driver Size 15″ (380mm Unit 100 mm Voice coil) ×2
Cabinet Material: 18mm (0.72″) High quality plywood
Connector: SPEAKON NL4×2 PIN1+/2+POS. PIN1-/2-NEG.
Color: The default is black, can be customized other colors according to the requirement
Net Weight: 72 KG Reference Application Field: Provided ultra-low frequency amplification for M8Ⅲand M10
MA1000CE
Technique Specification
| technical parameter Stereo mode: | 2×4Ω 1800W Each channel,@ 1 kHz <0.05% T.H.D. 2×8Ω 1200W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| Bridge mode: | 1x 8Ω 3600W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| frequency response: | 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω | ||||||||
| Input sensitivity: | 0.775V/1.0V/1.4V | ||||||||
| Total harmonic distortion: | <0.5dB | ||||||||
| Input impedance: | >20K/＞10K | ||||||||
| Signal to noise ratio: | ＞105 dB | ||||||||
| dynamic range: | ≥90 dB | ||||||||
| Damping factor: | >300 | ||||||||
| Conversion rate: | >15 V/us | ||||||||
| Voltage gain: | 30dB | ||||||||
| Output class: | E Class | ||||||||
| Protection function: | High temperature protection, DC protection, power on protection, overload protection | ||||||||
| External power supply: | 220V-240V/50-60HZ | ||||||||
| Size: | (W×D×H）483×430×88mm | ||||||||
| Weight: | G.W.28kg | ||||||||
MA41300CE
Technique Specification
| technical parameter Stereo mode: : | 4×4Ω 1800W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| Bridge mode: | 2x 8Ω 3600W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| frequency response: | 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω | ||||||||
| Input sensitivity: | 0.775V/1.0V/1.4V | ||||||||
| Total harmonic distortion: | <0.5dB | ||||||||
| Input impedance: | >20K/＞10K | ||||||||
| Signal to noise ratio: | ＞105 dB | ||||||||
| dynamic range: | ≥90 dB | ||||||||
| Frequency bandwidth: | 85Hz—20KHz | ||||||||
| Damping factor: | >300 | ||||||||
| Conversion rate: | >15 V/us | ||||||||
| Voltage gain: | 30dB | ||||||||
| Output class: | E Class | ||||||||
| Protection function: | High temperature protection, DC protection, power on protection, overload protection | ||||||||
| External power supply: | 220V-240V/50-60HZ | ||||||||
| Size: | (W×D×H）483×430×132mm | ||||||||
| Weight: | G.W.28kg | ||||||||
MA800CE
Technique Specification
| technical parameter Stereo mode: : | 2×4 1200W Each channel,@ 1 kHz <0.05% T.H.D. 2×8 800W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| Bridge mode: | 1x 8 2400W Each channel,@ 1 kHz <0.05% T.H.D. | ||||||||
| frequency response: | 20Hz - 20 kHz; +0,-0.3 dB 1W@8Ω | ||||||||
| Input sensitivity: | 0.775V/1.0V/1.4V | ||||||||
| Total harmonic distortion: | <0.5dB | ||||||||
| Input impedance: | >20K/＞10K | ||||||||
| Signal to noise ratio: | ＞105 dB | ||||||||
| dynamic range: | ≥90 dB | ||||||||
| Damping factor: | >300 | ||||||||
| Conversion rate: | >15 V/us | ||||||||
| Voltage gain: | 30dB | ||||||||
| Output class: | E Class | ||||||||
| Protection function: | High temperature protection, DC protection, power on protection, overload protection | ||||||||
| External power supply: | 220V-240V/50-60HZ | ||||||||
| Size: | (W×D×H）483×430×88mm | ||||||||
| Weight: | G.W.24kg | ||||||||
